jump to content

ASTUTE 2020 Update September 2020

Here at ASTUTE 2020, we can support your business throughout this period of uncertainty. Our world-class academics and technical experts from across our strong Welsh Universities partnership are available to support you through research and innovation activities. If you wish to discuss opportunities for working with us e.g. to modify your production to develop solutions to support the fight against COVID-19, you can contact us via email.


Image: Swansea-Based Collaboration Leads to Wave Energy Innovation

Swansea-Based Collaboration Leads to Wave Energy Innovation

Business: Marine Power Systems Ltd.

Expertise: Computational Engineering Modelling

Location: Swansea

Marine Power Systems (MPS), based in Swansea, is developing a Wave Energy Converter to address the challenges of extracting wave energy at viable cost. Computational research of the float structure is necessary to allow MPS to assess the suitability of the components and significantly de-risk the build and test stages.

ASTUTE 2020 is working with MPS on generating suitable computational models using information supplied by MPS along with performing finite element analysis on the structure.

The WaveSub consists of a power capturing float which is tied by multiple flexible lines to a large barge like reactor.

The lines are connected to a hydraulic power take-off system which is used to capture energy from the relative movement between the float and the reactor, which is then converted to electricity. There are indications that the proposed device has the potential to compete favourably with other available renewable technologies.

Challenges - Wave Energy

The proposed energy harvesting device relies on sea waves that do not fade away when the wind stops blowing, offering a level of consistency and an average power density (of about 2-3 kW/m2) superior to that of wind (0.5 kW/m2) and solar energy (0.1-0.3 kW/m2).

MPS have conducted scaled sea trials and tank testing, and sought support from ASTUTE 2020 in performing computational modelling of the device when immersed in sea water.

Image: Wave Energy Converter (WaveSub) model being towed to site

The float is manufactured locally by a private company (Camplas Technology Ltd.). It is formed of a continuously wound glass reinforced composite construction with stainless steel bolting plates woven into the float walls. The float is attached to a barge (including the energy harvesting devices) via cables, with the fastening line tension being a direct result of net float buoyancy on the submerged float.

We are reaching some exciting milestones in the development of our technology, specifically the deployment of a quarter-scale prototype WaveSub. We are thrilled to be liaising with ASTUTE 2020 for advanced computational modelling of the float.  

With the prestigious skills and facilities available from ASTUTE 2020 at the new Swansea University Bay Campus, as well as its philosophy of innovation and advancement, we have full assurance that the research being produced by ASTUTE 2020 will confirm that our design for a power take off float is fully fit for purpose.”

 - Dr Gareth Stockman, Chief Executive Officer,
Marine Power Systems Ltd.

Solution - Numerical Analysis

Finite element analysis has highlighted the fact that the WaveSub is capable of handling the external forces experienced under working conditions. The results of this collaboration will allow confidence that the design is fit for the intended world first application and highlight improvements that could be made to the full scale device.

As a result of the collaboration with ASTUTE 2020 at Swansea University on the WaveSub, MPS were declared the winners of the Research and Development award category at the Insider’s Business and Education Partnership awards in 2016 at Cardiff’s Marriott Hotel. The local collaboration between academia and industry along with the potential global impact of the Wave Energy Converter proved favourable with the judges.


The WaveSub development is an excellent example for the complementarity of different funding streams: support through ASTUTE 2020 (ERDF Research and Innovation) together with £2.5M of ERDF (Renewable Energy and Energy Efficiency) and £200k of energy catalyst funding from Innovate UK for the modelling, design, build, test and validation has enabled MPS to progress their device from concept to prototype.

MPS have now completed a 1:4 scale WaveSub and it will be tested under laboratory conditions and then later under sea conditions. It is an important step in the journey towards commercialisation of the Wave Energy Converter.

The WaveSub technology being developed by MPS has huge potential to contribute to energy security targets (wave power generating 10% of the world's electricity by 2050) and  could reduce reliance on unpredictable and non-renewable energy sources.

With the continuing developments at MPS and within the  wave energy sector, MPS have expanded their workforce by appointing an additional engineer, assisting with further developments  of the WaveSub.

As a result of this collaboration and further investment from Welsh Government, MPS have now reached a significant milestone and will unveil the 1:4 Scale WaveSub prototype this October.

The device that Marine Power Systems is developing is incredibly innovative and we are very supportive of the company’s work. Being brought in to engage with the Marine Power Systems team and collaborate on finite element simulations of the composite float is an exciting project and we look forward to working with Marine Power Systems until the float is ready for manufacture when the deployment stage is reached.”

- Dr Fawzi Belblidia, Senior Technical Manager, ASTUTE 2020

Rich text format of the video is available here.